Need help?Do you have a question about the Partlow MIC 1161 and is the answer not in the manual?
Core functionality and capabilities of the limit controller.
Description of dual displays and status indicators.
Details on alarm outputs and their indications.
Information on the retransmission output option.
Procedures and considerations before wiring the instrument.
Details on connecting various input types to the instrument.
Wiring instructions for output relays and signals.
Explanation of button functions and their uses.
Meanings of the OUT, EXCEED, ALM, S indicators.
Procedures for adjusting the setpoint value.
Enabling/disabling access to Program and Set-Up modes.
Configuring or re-configuring instrument parameters.
Adjusting setpoint, alarms, and scaling.
Diagram showing the internal components of the controller.
Diagram of the CPU Printed Wiring Assembly.
Diagram of the Option PWA for DC Output 3.
Available input ranges and codes for thermocouples.
Available input ranges and codes for RTDs.
Available input ranges and codes for DC inputs.
Details on input types, impedance, and isolation.
Rating and type of output relays and retransmit.
Accuracy specifications for various input types.
Terms and duration of the product warranty.
Exclusions and conditions that void the warranty.
Process for returning products for repair or replacement.
General| Type | Microprocessor-based Controller |
|---|---|
| Control Mode | On/Off, PID |
| Accuracy | ±0.25% of span |
| Input | Thermocouple, RTD, mA, V |
| Output | Relay, SSR, mA, V |
| Alarms | Configurable alarms |
| Power Supply | 24 VDC, 100-240 VAC |
| Operating Temperature | 0 to 50°C |
| Enclosure Rating | IP65 |
| Communication | RS-485 |
To Next Page
