Need help?Do you have a question about the Partlow MIC 6000 and is the answer not in the manual?
Instructions for careful installation and operation, observing electrical codes and safety standards.
Guidelines for minimizing electrical noise and preparing for wiring connections.
Diagrams and instructions for various input and output wiring connections.
Procedures for preparing the instrument for operation via front keypad.
Instructions on starting, stopping, and managing profile execution.
Guidance on adjusting PID parameters for optimal process control.
Details various calibration routines necessary for accurate measurement.
Provides a guide to diagnose and resolve common instrument conditions.
General| Model | MIC 6000 |
|---|---|
| Control Modes | On/Off, PID |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Controller Type | Microprocessor-based |
| Input Type | Thermocouple, RTD, mA, V |
| Output Type | Relay, SSR |
| Display | LED |
| Power Supply | 100-240 VAC |
| Communication | RS-485, Modbus |
| Enclosure Rating | IP65 (front panel) |
To Next Page
