35 MIC 1161 Manual
Minimum Hold
This parameter tracks and saves the minimum excursions of the process
variable, applicable to a Low Limit only. This is a Read Only parameter.
Display code is LoHd.
Time Exceeded
This parameter measures and saves the amount of time that the limit is
exceeded. The time is measured and displayed in minutes and seconds
from 0 to 99 minutes and 59 seconds. After this time the display will
change automatically to indicate minutes and tens of seconds from 100.0 to
999.5. For times greater than 999.5, the display "[HH]" will be shown. This
is a Read Only parameter. Display code is tLE.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
