MIC 1161 Manual
2
Information in this installation, wiring, and operation manual is subject to change
without notice. One manual is provided with each instrument at the time of ship-
ment. Extra copies are available at the price published on the front cover.
Copyright © January 1995, The Partlow Corporation, all rights reserved. No part
of this publication may be reproduced, transmitted, transcribed or stored in a re-
trieval system, or translated into any language in any form by any means without
the written permission of the Partlow Corporation.
This is the First Edition of the MIC 1161 manual. It was written and produced
entirely on a desk-top-publishing system. Disk versions are available by written
request to the Partlow Publications Department.
We are glad you decided to open this manual. It is written so that you can take full
advantage of the features of your new MIC 1161 limit controller.
THE INTERNATIONAL HAZARD SYMBOL IS INSCRIBED ADJACENT TO
THE REAR CONNECTION TERMINALS. IT IS IMPORTANT TO READ
THIS MANUAL BEFORE INSTALLING OR COMMISSIONING THE UNIT.
!
NOTE:
It is strongly recommended that Partlow equipped applica-
tions incorporate a high or low limit protective device which
will shut down the equipment at a preset process condition
in order to preclude possible damage to property or prod-
ucts.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
