4. The user must then verify that the information on the “Enter the TMS IP/DNS” and
“Enter the TMS port” screens match the information shown below.
5. Assuming the information matches, the user can proceed by tapping the green
“Enter” button on both screens.
a. This will take you to the “Enter TMS TID” screen (next page).
6. On the “Enter TMS TID” screen, the user must enter the unique terminal ID
provided with by Planet.
a. This ID will consist of 8 digits. There is only ONE TMS TID per pin pad.
b. Once entered, the user must confirm by tapping on the green “Enter” button
To Next Page
Loading...
