PAX A35 - A35 Terminal Details

PAX A35 Setup and User Guide
weareplanet.com
3
2. A35 Terminal Details
Power can be supplied to the A35 by connecting the AC power adapter to the
communication cable
1. Remove the back cover (At the bottom of the terminal). *Will need Phillips
screwdriver*
2. Put the communication cable head to the Type-C interface as shown on the image
below.
3. Now connect the provided 5.0v USB power adapter to the other end of the
communication cable marked DC.
4. Lastly, connect the ethernet cable to the ethernet port in the communication cable
marked LAN.
Camera
LCD Display Contactless Card Reader
Magstripe Card Reader
Privacy Shield
Keypad
Smart Card Reader