PAX A35 - Power

PAX A35 Setup and User Guide
weareplanet.com
5
4. Power
The multi-purpose cable provides an USB-C power plug and includes several
connectivity options for the A35.
To power the A35 you need to use the provided AC/DC power adapter and the USB-A
to USB-C cable. Connect the USB-C end of the cable to the DC Input and the USB-A
side to the AC/DC adapter as shown in the pictures.
Note: The Serial and USB-A ends of the multi-purpose cable are not used and cannot
be removed. Make sure these are safely tied and do not get in contact with any active
power source.
AC/DC Power
Adaptor
USB-A Connector
RS-232 Connector
Ethernet Connector
USB-C DC
Input
USB-A to USB-C Cable
DC Power