Date: 08-20-2019 14 PAX Customer Support
Version: 1.0 support@pax.us
(877) 859-0099
www.pax.us
8 AC Power Connection
The E700 can be powered by plugging the power adapter and power cord into the power port on the
E700.
Plug Power Adapter into Power Port
DO NOT connect the other end of the power source until all the
other cables are connected first. Plugging in the power cord to
the power source before the other cables are installed may
result in damage to the terminal or connected devices.
3. After all terminal cables are connected, plug the terminal AC power cable to the power source.
Do not disconnect the power source while applications are being
downloaded to the terminal. The applications could be
downloaded improperly, or the Flash memory could be
damaged.
To Next Page
Loading...
