Date: 08-20-2019 16 PAX Customer Support
Version: 1.0 support@pax.us
(877) 859-0099
www.pax.us
10 Hybrid Card Reader
The Q20 on the consumer facing side of the E700 includes a reader that can be used as an EMV card
reader and an NFC/Contactless card reader.
Q20
10.1 Magnetic Stripe Reader
To use the Magnetic Stripe reader, insert the Magnetic Stripe card with the magnetic stripe down into
the card reader slot located on the top of the Q20. The terminal reads the information from the
magnetic stripe card when the magnetic stripe is inserted into the card slot.
10.2 EMV Card Reader
To use the EMV card reader, insert the EMV card with the front of the card facing you, chip side up, and
chip end down into the card slot located on the top of the Q20. Leave the card inserted until the
terminal provides a message to remove the card.
10.3 NFC/Contactless Card Reader
To use the NFC/Contactless card reader, tap the NFC/Contactless card to the Q20 screen when
prompted. The terminal uses an antenna device that detects and retrieves information from the card.
To Next Page
Loading...
