EasyManua.ls Logo

PAX E700 - Wi-Fi Configuration; Dhcp

PAX E700
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Date: 08-20-2019 25 PAX Customer Support
Version: 1.0 support@pax.us
(877) 859-0099
www.pax.us
E700 REFERENCE GUIDE
16.1 Wi-Fi Configuration
The E700 supports Wi-Fi for network and internet access. Wi-Fi is a wireless computer network that links
two or more devices using wireless communication to a local area network (LAN) within a limited area,
such as a store or office building.
Available access types of Wi-Fi on the E700 are DHCP, Static IP, Manual Static IP, and Manual Proxy. The
following sections include step-by-step procedures for setting up each of these communication types.
DHCP
The E700 supports DHCP setup for network and internet access. DHCP stands for Dynamic Host
Configuration Protocol. DHCP is a network management protocol used in IP networks. The DHCP server
dynamically assigns an IP address and other network configuration parameters to each device on the
network.
To set up DHCP:
1. From the Main Menu, select Settings.
Settings on Main Menu
2. If a password is required, enter the password, press the green check mark button (), and press
OK.

Table of Contents

Related product manuals