S920 Reference Guide
v1.0 | 18
10. Card Readers
This section covers the card readers on the S920 mobile terminal.
10.1 Magnetic Stripe Reader
To use the Magnetic Stripe Reader, use a a quick and steady movement to swipe the Magnetic Stripe
Card through the reader on the right side of the S920 mobile terminal. The S920 Magnetic Stripe
Reader is bidirectional so cards can be swiped top to bottom or bottom to top. For best results the
magnetic stripe of the card should be facing the terminal.
10.2 EMV Card Reader
To use the EMV Card Reader, insert the EMV Card with the front of the card facing up, chip side up, and
chip end facing toward the card slot. Slide the card into the card slot located on the bottom of the
S920. Leave the card inserted until the terminal provides a message to remove the card.
To Next Page
Loading...
