Pco pco.edge 4.2 bi User Manual

16
Enabling and Polarity of IO Signals
The polarity of the input and output signals indicating their active
states is selectable (positive or negative logic).
The polarity of level-sensitive signals can be set to High (positive
logic) or Low (negative logic).
The polarity of edge-sensitive signals can be set to Rising (positive
logic) or Falling (negative logic).
Detailed Explanation for Status Expos SMA #4 Signal Timing
Setting in pco.camware:
There are four different signal types selectable. The example timing
diagram shows all four different possibilities:
• Shows the exposure time of the first line
• Shows when all sensor lines are exposed
• Shows the exposure time of the last line
• Shows if any sensor line is integrating
1
2
4
3
1
2
4
3
1
2
3
4

Pco pco.edge 4.2 bi Specifications

General

Brand	Pco
Model	pco.edge 4.2 bi
Category	Digital Camera
Language	English