15 | P a g e
Connection. There are three options in the connection and they control how the primary and
secondary Gateway connection is used. They are:
o Use primary, if fails use secondary connection (the default)
o Use only Primary connection
o Use only secondary connection
Once you have the settings entered then you can start the PulseWorx application. The application
connects to the Gateway and then displays an icon for each room.
Note: All the screen images here are using an iPad Mini. An iPhone, iPad Touch, or a full size iPad may
appear differently but the idea is the same.
A tap on a room opens that room and shows icons for all the devices in the room. The text below the
room name may appear in gray text or yellow text. If yellow then some device in the room is on. If
To Next Page
Loading...
Need help?
General