55 | P a g e
Upgrading the PulseWorx Gateway Firmware
The installation of each version of UPStart installs the latest version of the Gateway firmware into the
installation folders on your disk. Each time UPStart connects to the Gateway it checks that the
firmware in the Gateway is the most current. If it isn't then a popup displays.
Step 1
In the “PulseWorx Gateway” category, “Advanced” panel, press the “Firmware Update” button. It first
displays some helpful info on the process.
Press "Yes" to continue and a second popup pauses the process until UPStart confirms that the
firmware files are available and of the correct version.
To Next Page
Loading...
Need help?
General