PAGE 16
Class 1 Medical
Rev. 2
Initial adjustments should be made to suit your personal body profile and preference.
Thereafter the following maintenance schedule is recommended:
Inspect/Adjust
Every 6 Months
Wheelchair rolls straight (no
excessive drag or pull to one side).
Ensure all fasteners are secure.
Do not interfere with tires when
rolling.
Pivot points free of wear and
looseness.
Wheel locks easy to engage.
Ensure all fasteners are secure.
Inspect for rips or sagging.
Ensure all fasteners are secure
No excessive side movement or
binding when lifted and spun.
Quick-release axles lock properly and
lubricate
Inspect wheel/fork assembly for
proper tension by spinning caster;
caster should come to a gradual
stop.
Wheel bearings are clean and free of
moisture.
Ensure caster stem fastener is secure
CAUTION: Wheels and tires should
be checked periodically for cracks
and wear, and should be replaced
when necessary.
Inspect for flat spots and wear.
If pneumatic tires, check for proper
inflation
Inspect rear tires for cracks and
wear.
CAUTION: Wheels and tires should
be checked periodically for cracks
and wear, and should be replaced
when necessary.
Clean upholstery and armrests.
Inspect axles are free from dirt, lint,
etc.
Ensure fasteners are secure and do
not show signs of excess wear
To Next Page
Loading...