Peavey Max 100 - Rear Panel Interface Options; PRECISION BALANCED DIRECT INTERFACE; DI GND LIFT SWITCH; FX LOOP

(21) PRECISION BALANCED DIRECT INTERFACE
is XLR output is used to connect the Max pre amp section to external equipment, such as mixing consoles, external power ampliers,
or recording equipment. is novel circuit provides a perfectly balanced and noise-free signal with none of the problems associated
with small transformers.
(22) DI GND LIFT SWITCH
is switch may be used to eliminate hum caused by ground loops between the amplier and other equipment, such as a mixing con-
sole.
(23) FX LOOP
e eects loop consists of the SEND and RETURN jacks, which are used to patch external eects processors post EQ in the signal
chain. Connect the SEND jack to the input of eects processors. Connect the RETURN jack to the output of eects processors. e EF-
FECTS SEND and RETURN jacks can also be used as a line level unbalanced preamp output and power amp input jacks, respectively.