- 51 -
Securing your child  into the child restraint
6.  To  adjust  the  shoulder  strap  level, 
from bottom to top, pull the ring located on 
top of headrest until the panel is disengaged 
and able to move. Once the desired position is 
reached, make sure that the panel is properly 
latched. 
To adjust the shoulder strap level from top to 
bottom pull the ring with one hand and push 
the  panel  down  with  the  other  hand  at  the 
same  time.  Check  that  the  panel  is  properly 
latched.
Note: The  lower  7 head  panel  positions can 
be used in the rear facing mode.  Positions 8, 
9 and 10 should only be used in the forward 
facing  mode.  Check  maximum  rear  facing 
head panel height behind the seat (detail in 
picture 6).
7.  Insert  both  latch  plates  into  the  buckle 
until you  hear them  click.  Pull  on  the  straps 
to  make  sure  that  both  plates  are  latched 
securely.
10
9
8
7
6
5
4
3
2
1
6
7