- 52 -
Securing your child into the child restraint
8. The harness is equipped with a chest clip.
This device is used in order to guarantee that
the shoulder harness is positioned correctly
on the shoulder, preventing the risk of
the straps falling down the shoulder in an
accident.
To close the chest clip push the two parts
together as shown.
9. To tighten the harness, pull the adjuster
strap at the bottom of the child restraint until
strap is snug. Make sure you leave one nger
width between the harness and your child’s
collar bone.
8
9
To Next Page
Loading...
