Pegatron IPMIP - Ide Configuration; Onboard Devices Configuration

IPMIP Motherboard Reference Guide 25
8 BIOS Setup reference
Advanced BIOS Features
CPU Host Ratio
Default: [19]
Spread Spectrum
Default: [Enabled] / Options: [Disabled] [Enabled]
IDE Conguration
The items in this menu allow you to set or change the congurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
congure the item.
SATA 0/SATA 1/SATA 2/SATA 3/SATA 4/SATA 5
While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a device
item then press <Enter> to display the IDE device information.
Type Default: [Auto]
LBA/Large Mode Default: [Auto]
Block (Multi‑Sector Transfer) Default: [Auto]
PIO Mode Default: [Auto]
DMA Mode Default: [Auto]
S.M.A.R.T. Default: [Auto]
32Bit Data Transfer Default: [Disabled]
SATA Controller Setup
Default: [IDE]
Onboard Devices Conguration
Onboard USB Controller
This item allows you to enable or disable the USB Functions.
Default: [Enabled] / Options: [Disabled] [Enabled]
USB 2.0 Controller
This item allows you to change the USB 2.0 Controller setting.
Default: [Enabled] / Options: [Disabled] [Enabled]
USB Keyboard/Mouse Support
This item allows you to enable or disable support for USB keyboard or Mouse.
Default: [Enabled] / Options: [Disabled] [Enabled]