pellenc EXCELION 2000 - Adjusting the Working Position; Adjusting the Handlebar Orientation

13
53_12_014B
53_12_017B
53_12_015B
53_12_016B
A B
C D
 INEOKINOIION
Before using the Excelion 2000 Professional brush cutter, its working position must be adjusted to the operator's size.
This makes it easier for the operator to use and requires little effort.
Adjusting the machine's working position to the operator's size is a 3-step process:
adjusting the orientation of the handlebar,
installing and adjusting the harness,
balancing the machine.
These various adjustments are repeated until the brush cutter is in a suitable working position.
These operations help adjust the position of the handlebar to the shape of the user. Users must not work with their arms
stretched out or completely bent.
 INEOIENIONOENE
■ PUTTING THE MACHINE INTO SERVICE

