pellenc EXCELION 2000 - DESCRIPTION AND TECHNICAL CHARACTERISTICS; Description of Main Components; Warning Before Working on Tool

9
56_10_016A
1 2 3 4 5 6 7 8 9 10 11
12
NIN
OO

■ DESCRIPTION AND TECHNICAL CHARACTERISTICS
The Excelion 2000 Professional brush cutter is supplied without a cutting head:
They must be ordered independently.
Protects the electric motor and allows heat to dissipate.
Used to guide and manoeuvre the Excelion 2000 Professional brush cutter
Connects the machine to the Pellenc power tool battery.
Used to hang the tool from the user’s harness.
Protects the control circuit board and allows heat to dissipate.
Used to adjust the angle of the handlebar and put the tool in its transport position.
Prevents inadvertent activation of the control trigger; the safety trigger must be activated prior to
activating the control trigger.
 Limits the risk of the operator being hit by ying objects (stones, bits of metal). A blade attached to
the safety guard makes it possible to obtain the correct length for the cutting wires.

Limits the risk of the operator being hit by ying objects (stones, bits of metal, etc.). A blade attached
to the rim of the safety guard makes it possible to adjust the length of the cutting wires.


