pellenc EXCELION 2000 - Transport of the Brush Cutter; Rapid Tool Release System; Storage of the Brush Cutter; Safety Measures for Charger and Battery Use

7
53_13_086A
53_13_087A
53_12_050B
53_13_070B
 EEEOIEIENEE

Keep the original packaging for storing the Excelion 2000 Professional brush cutter in the possible event of shipping the
tool for overhaul or repair.
Never carry the machine or the battery by the power cord.
Always release the control trigger to stop the electric motor and ensure the cutting tool is no longer moving before putting
the machine on the ground.
Place metal cutting tool(s) in their original packaging, or place them in their transport bag.
Put the battery back in its original packaging.
Turn the handlebar so that it is aligned with the pole to facilitate the transport of several tools.
Secure the packed machine and battery in the transport vehicle.
A rapid tool release system makes it possible for operators to get away quickly from the tool.
storage of the Excelion 2000 Professional brush cutter
Keep the original packaging for storing the machine
Store the machine in a dry place out of children's reach.
Lubricate the output shaft angle during prolonged storage.
E
emergency release of the Excelion 2000 professional brush cutter
■ SAFETY INSTRUCTIONS