18
53_14_020B
+
+
1- Head: ROLL CUT 2- Head: TAP CUT / TAP CUT 2 3- Head: MULTI-CUT 4- Head: BLADE CUT 5- Head: CITY CUT
For mowing large areas. The
diameter of the wire must be
adapted to the vegetation.
For mowing and clearing edges.
Mainly used in situations when the
cutting wire suffers signicant wear
and tear (along walls or fences).
For all types of mowing, requiring a
quick change of tools
Ø 320 mm
Mowing of
dense grass and
scrub brush
Ø 320 mm
Ø 230 mm
Ø 240 mm
Mulching of
woody weeds,
dense scrub or
thorny vegeta-
tionØ 2.4 PELLENC (up to 9 m) = lawn
Ø 3 PELLENC (up to 6 m)= dense grass and scrub brush
Ø 255 mm
For the mowing of
dense grass and
thick shrub brush
Cutting of shrubs,
plant regrowths
or coppices to
be used with a
specific safety
guard
8-tooth blade
■ USAGE
Choosing the adequate cutting head is important for the result of your mowing operation, regardless of whether you goal is cleaning and enhancing your green space, or
eliminating tall grass and wild vegetation, or even thickets or bushes obstructing the way. regardless of whether you goal is cleaning and enhancing your green space, or
eliminating tall grass and wild vegetation, or even thickets or bushes obstructing the way.
To Next Page
Loading...
