pellenc EXCELION 2000 - Cleaning and Greasing the Blades; Sharpening the Blades

35
45°
3.7 mm
53_14_046A
1
2 3
4
5
6
7 8
53_14_037B
ENINNEINEE
ENINEE
■ MAINTENANCE
Clean the indicated zones on the illustration using a athead
screwdriver, compressed air, a brush or hot water (only on
the blades and guides coloured in dark grey)
Dry all the different parts using a clean and dry cloth.
Lubricate the blades using the lubrication bomb re: 121633
Mount back the cutting head.
To make sure the CITY CUT cutting head is working properly, it is mandatory to dismount the blades at least once a
week (or every 30h of use) to clean and lubricate it all.
Dismounting: see procedure p.32