The Prima SP2 anaesthesia workstation
range is intended to provide controlled
concentrations and flows of anaesthesia
gases into a patient breathing system, from
where the anaesthesia ventilator and
breathing circuit will then deliver this fresh
gas mixture to the patient
Use the Prima SP2 in conjunction with
anaesthetic vaporizers, breathing hoses and
patient connection fittings which comply with
the relevant ISO standard or equivalent.
Depending upon the patient circuit selected,
the machines can be used in open, semi-
open, semi-closed or closed circuit
configurations.
The range has been designed to give a wide
choice of configurations and accessories,
including:
Gas supplies
Up to four gases - oxygen, nitrous oxide, and
air, with optional fourth gas (see section 4).
Pin-index cylinder yokes, and provision for
up to three pipeline supply inlets.
Vaporizer mounting systems
Backbar manifold for Selectatec Compatible,
or Cagemount type vaporizers.
Anti-hypoxic Device (AHD)
The mechanical AHD system is designed to
minimise the risk of a hypoxic mixture
reaching the patient (see section 3).
4
2. PURPOSE
To Next Page
Loading...