User Guide Evolio
Ref. MKT-UG-037 / C - 14.11.2019 13 / 116
EN
5.2. Commands
5.3. Basic programming
5.3.1. Program system size
Set the resin volume in liters.
5.3.2. Time setting and winter time - summer time change
Set the current time.
23. Regen icon Flashes when a regeneration at the next time of regeneration has been called for.
Also displayed (continuously) when in regeneration.
24. Salt setting
Programming the amount of salt used for a regeneration.
25. Regeneration time
Programming the time of regeneration.
26. Time of day
Programming the current time of day.
1. Display Used to show informations, see 5.1. Home screen, page 12.
2. LED
Warning for low salt level (if chlorine generator is installed).
3. - Down arrow
Used to scroll down in a parameter list or to decrement a parameter value.
4. - Set
Used to confirm a setting and save it in the controller's non volatile memory.
5. - Up arrow
Used to scroll up in a menu list or to increment a parameter value.
6. - Regenerate
Used to command the controller to regenerate.
Also used to change the lock mode.
A Use and to scroll though resin volume choices.
B Choose the volume to your system model (10, 15, 20 or 30 L).
C Press to validate the resin volume selected and advance to the next
parameter using or .
A Press when the time of the day is displayed.
→ Time flashes.
B Adjust displayed time with and .
C Press to validate the selection and advance to the next parameter
using or .
To Next Page
Loading...
