User Guide Evolio
14 / 116 Ref. MKT-UG-037 / C - 14.11.2019
5.3.3. Day of week
Set the current day of the week.
5.3.4. Regeneration time
Set the time at which regeneration will take place.
5.3.5. Calendar override
Set number of days for calendar override.
5.3.6. Salt setting
Set the salt amount used for each regeneration. Three options are available:
•L - low;
•S - standard;
•H - high.
Refer to the following table to define the amount of salt, in g/L of resin, for your softener.
A Press .
→ Arrow flashes.
B Select displayed day with and .
C Press to validate the selection and advance to the next parameter
using or .
A Press .
→ Regeneration time flashes.
B Adjust displayed time with and .
C Default setting: 2:00am.
D Press to validate the selection and advance to the next parameter
using or .
A Press .
→ Number of days flashes.
B Adjust displayed number with and .
→ Default setting for calendar override: 0 = deactivated.
→ Days can be adjusted from 0.5 (twice a day) to 99 days.
C Press to validate the selection and advance to the next parameter
using or .
Salt setting Evolio 255 10 Evolio 255 15 Evolio 255 20 Evolio 255 30
L 45.0 46.7 55.0 53.3
S 91.0 133.3 160.0 136.7
H 180.0 226.7 250.0 226.7
A Press .
→ Setting flashes.
B Adjust displayed settings with and .
C Press to validate the selection and advance to the next parameter
using or .
To Next Page
Loading...
