Pentair FLECK 5600 SXT

Other manuals for Pentair FLECK 5600 SXT

Questions and Answers:

Jeff MartinezAug 27, 2025

Why does my Pentair Water Filtration System have excessive salt consumption?

W
williamlesterAug 27, 2025
Excessive salt consumption in your Pentair Water Filtration System can be due to a few reasons. Primarily, check the brine refill setting to ensure it's properly configured. Also, too much water in the brine tank can lead to excessive salt usage, so refer to the troubleshooting steps for that specific problem. Finally, incorrect programming can cause this issue, so make sure the system is programmed correctly.

Geoffrey WhiteAug 25, 2025

What to do if there is too much water in the brine tank of my Pentair Water Filtration System?

N
Natalie NguyenAug 26, 2025
If there's too much water in the brine tank of your Pentair Water Filtration System, start by cleaning the drain line flow control. Also, clean the injector and screen, replacing them if necessary, as a plugged injector system might be the cause. A faulty brine valve could also be responsible, so consider changing it. Ensure that the system is correctly programmed. A controller that is not cycling can also cause this issue, so replace the controller. Finally, check for any foreign material in the brine valve or brine line flow control; replace the brine valve seat and clean the valve, or clean the brine line flow control, respectively.