Pentair FLECK 5800 SXT - Original settings; Installation settings; Hydraulic settings; Electrical settings

1 - VALVE SPECIFICATIONS
Installation N°
Valve serial N°
Tank size
Resin type
Resin volume
VALVE TECHNICAL CHARACTERISTICS
VALVE TYPE
5800/1600 /DF 5800/1600/UF
¾"meter
INITIATION SET REGENERATION
Time Clock Days Litres
Weekly Time Clock Day(s) of the week
(Monday, Thuesday… Sunday)
Meter delayed REGENERATION TIME
Meter immediate 2 A.M.
Or a.m./p.m.
VALVE TECHNICAL CHARACTERISTICS
Cycle 1 Min.
Cycle 2 Min.
Cycle 3 Min.
Cycle 4 Min.
HYDRAULIC SETTINGS
Injector size Pressure regulator
Drain line ow control (DLFC) GPM 1,4 bar (20 PSI)
Brine line ow control (BLFC) GPM without
VOLTAGE
24V/50Hz
Valves complying european regulations :
- Nr. 2004/108/CE, « Electromagnetic compability »
- Nr. 2006/95/CE, « Low voltage »
- Nr. D.M. 174/04, Italian regulation
NOTES
System capacity m
3
°tH
Inlet water hardness °tH
Water hardness after mixing
valve
°tH
Brine tank size L
Quantity of salt per
regeneration
Kg
2 • MR12 Fleck 5800 LXT & SXT Downow/Upow