Pentair FLECK 5800 SXT - 5800 Control Valve Assembly Downflow;Upflow

19 - 5800 CONTROL VALVE ASSEMBLY
DOWNFLOW/UPFLOW
Item No. QTY Part No. Description
1 ................ 1 .........61857-20 ............Valve Body Assy, Mixing,
Downow/Upow (Includes Items
9, 10, 11 and 12)
2 ................ 1 .........18271..................Screen Injector, 5000
3 ................ 1 .........40064..................Seal Injector
4 ................ 1 .........18277..................Cap Injector
..........18278-20 ............Injector Cap Assy, 1610 Regulated,
5000, 20 psi, Black, Upow
..........18278-30 ............Injector Cap Assy, 1610 Regulated,
5000, 30 psi, Black, Upow
5 ................ 2 .........18262..................Screw, Hex Washer Head, #10-24
x 1.00
6 ................ 1 .........10759..................Label, 0.5 gpm 1.5 lbs Salt/Min
7 ................ 1 .........13333..................Label, Injector, Blank
8 ................ 3 .........18261..................Screw, Hex Washer Head, #10-24
0.81
9 ................ 1 .........13304..................O-ring, -121
10 .............. 1 .........18303-01 ............O-ring, -336, 560CD
11............... 1 .........18589..................Retainer, Tank Seal
12 .............. 1 .........13030..................Retainer, Distributor Tube O-ring
13 .............. 1 .........18312..................Retaining Cup
14 .............. 1 .........14613..................Flow Straightener
15 .............. 1 .........60628..................Meter Assy, Turbine, Electronic
16 ..........................61837..................Piston and Seal Kit Assy,
Downow, 5800
..........61838..................Piston and Seal Kit Assy, Upow,
5800
17 .............. 1 .........60032..................Brine Valve, 4600/5600
18 ..........................60022-25 ............BLFC, 0.25 gpm, 5000/5600/9000
..........60022-50 ............BLFC, 0.50 gpm, 5000/5600/9000
..........60022-100 ..........BLFC, 1.0 gpm, 5000/5600/9000
19 ..........................60705-00 ............DLFC, Plastic, Blank
..........60705-06 ............DLFC, Plastic, 0.60 gpm
1
2
3
4
Item No. QTY Part No. Description
..........60705-08 ............DLFC, Plastic, 0.80 gpm
..........60705-10 ............DLFC, Plastic, 1.0 gpm
..........60705-12 ............DLFC, Plastic, 1.2 gpm
..........60705-13 ............DLFC, Plastic, 1.3 gpm
..........60705-15 ............DLFC, Plastic, 1.5 gpm
..........60705-17 ............DLFC, Plastic, 1.7 gpm
..........60705-20 ............DLFC, Plastic, 2.0 gpm
..........60705-24 ............DLFC, Plastic, 2.4 gpm
..........60705-30 ............DLFC, Plastic, 3.0 gpm
..........60705-35 ............DLFC, Plastic, 3.5 gpm
..........60705-40 ............DLFC, Plastic, 4.0 gpm
..........60705-45 ............DLFC, Plastic, 4.5 gpm
..........60705-50 ............DLFC, Plastic, 5.0 gpm
..........60705-60 ............DLFC, Plastic, 6.0 gpm
..........60705-20 ............DLFC, Plastic, 2.0 gpm
..........60705-70 ............DLFC, Plastic, 7.0 gpm
..........60706-10 ............DLFC, AC x 3/4"F, 10 gpm
..........60706-12 ............DLFC, AC x 3/4"F, 12 gpm
..........60706-15 ............DLFC, AC x 3/4"F, 15 gpm
20 ..........................18272-000 ..........Injector Assy, 1610, #000, Brown
..........18272-00 ............Injector Assy, 1610, #00, Violet
..........18272-0 ..............Injector Assy, 1610, #0, Red
..........18272-1 ..............Injector Assy, 1610, #1, White
..........18272-2 ..............Injector Assy, 1610, #2, Blue
..........18272-3 ..............Injector Assy, 1610, #3, Yellow
21 ..........................18276-01 ............Injector Assy, Plug, w/O-rings
Not Shown:
..........40947-01 ............Plug, Brine Valve, w/O-ring, 560CD
..........13918-01 ............BLFC Module Plug Assy, w/O-ring
NOTE: In upow units, the Injector Plug and Injector Assy are put in the
reverse holes.
In lter units, both injector holes are plugged with 18276-01.
5
6
7
8
9
10
11
12
13
14
15
21
20
19
18
17
16
22 • MR12 Fleck 5800 LXT & SXT Downow/Upow