Pentair IntelliBrite Installation Guide

Pentair IntelliBrite

56 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

PRINTED ON: 7/29/2009, 600054_ctlg pics.SLDASM

English

Deutsch

Nederlands

Español Italiano

2

11

20

29

38

47

Français

INTELLIBRITE

®

CONTROLLER

(FOR INTELLIBRITE POOL & SPA LIGHTS)

INSTALLATION GUIDE / INSTALLATIEHANDLEIDING

BEDIENUNGSANTLEITUNG / GUIDE DE L’INSTALLATION

GUIA DE INSTALACION / GUIDE ALL’INSTALLAZIONE

IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS

AQUATIC SYSTEMS 620201 (Rev. A 04/2014)

Table of Contents

Other manuals for Pentair IntelliBrite

User And Installation Guide16 pages

User Guide48 pages

Installation And User Guide16 pages

Questions and Answers:

S
Scott JohnsonJul 27, 2025
What to do if both LEDs are flashing on my Pentair Controller?
- J
  Joy AllenJul 27, 2025
  If both LEDs on your Pentair Controller are flashing, it means the IntelliBrite Controller has detected that the load is exceeding the maximum allowable wattage or the output is shorted. To resolve this: 1. Switch the IntelliBrite Controller OFF and remove the excessive load or short. 2. Press the IntelliBrite Controller power switch to power on the unit. Make sure the LEDs are no longer flashing.
J
Jerome JimenezAug 6, 2025
What to do if the light will not illuminate with my Pentair Controller?
- K
  Kylie WolfeAug 6, 2025
  If the light connected to your Pentair Controller won't illuminate or isn't functioning properly, check the ground fault wiring and reset it if needed. Also, check the light wiring connection to the junction box at the pool side and to the main circuit breaker. Ensure that proper AC power is being supplied to the light.
S
Steven JohnsonAug 16, 2025
What to do if Pentair IntelliBrite light will not illuminate?
- J
  Jerry DeanAug 16, 2025
  If your Pentair Lighting Equipment light won't turn on, begin by inspecting the ground fault wiring and try resetting it. Then, verify the light's wiring connection at both the poolside junction box and the AC power switch. Ensure that the light is receiving adequate AC power.

Pentair IntelliBrite Specifications

General

Housing Material	Polymer
Lens Material	Polycarbonate
IP Rating	IP68
Color Options	Multiple
Wattage	40W
Voltage	12V or 12 VAC
Control	Automation System
Installation	In-ground Pool
Lifespan	30, 000+ hours
Type	LED Pool Light
Light Color	Color changing

Related product manuals

Preview: Pentair IntelliPool

Pentair IntelliPool

Preview: Pentair INTELLICHLOR IC15

Pentair INTELLICHLOR IC15

Preview: Pentair IC60

Preview: Pentair INTELLIBRITE 5G

Pentair INTELLIBRITE 5G

Preview: INTELLIBRITE 5G LED LIGHT

INTELLIBRITE 5G LED LIGHT

Preview: Pentair MAGICSTREAM LAMINAR

Pentair MAGICSTREAM LAMINAR

Preview: Pentair Sand Dollar Filter

Pentair Sand Dollar Filter

Pentair Meteor 26

Preview: Pentair AQUALUMIN III

Pentair AQUALUMIN III