EasyManuals Logo

Pentair SPACOMMAND CP3800 Series User Manual

Pentair SPACOMMAND CP3800 Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
SPACOMMAND
®
Spa-Side Remote Installation and User’s Guide
i
Most states and local codes regulate the construction, installation, and
operation of public pools and spas, and the construction of residential
pools and spas. It is important to comply with these codes, many of which directly
regulate the installation and use of this product. Consult your current local building and
health codes for more information.
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST
READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE
USING THE SPA-SIDE REMOTE.
Before installing this product, read and follow all warning notices
and instructions in this Guide. Failure to follow warnings and
instructions can result in severe injury, death, or property damage.
Call (800) 831-7133 for additional free copies of these instructions. Please refer to
www.pentairpool.com for more information related to this products.
IMPORTANT NOTICE - Attention Installer: This Installation and User’s
Guide (“Guide”) contains important information about the installation,
operation and safe use of this spa-side remote. This Guide should be given
to the owner and/or operator of this product.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
The SpaCommand
®
Spa-Side Remote must be installed by a qualified
pool professional in accordance with the current National Electrical
Code (NEC), NFPA 70 or the Canadian Electrical Code (CEC), CSA
C22.1. All applicable local installation codes and ordinances must
also be adhered to. Improper installation will create an electrical
hazard which could result in death or serious injury to pool users,
installers or others due to electrical shock, and may also cause
damage to property. Always disconnect the power to the pool light at
the circuit breaker before servicing the light. Failure to do so could
result in death or serious injury to serviceman, pool users or others
due to electrical shock.
Control System is intended to control heaters with built-in high limit
circuits ONLY. Failure to do so may cause property damage or
personal injury.
Do not use this product to control an automatic pool cover.
Swimmers may become entrapped underneath the cover.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS GUIDE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentair SPACOMMAND CP3800 Series and is the answer not in the manual?

Pentair SPACOMMAND CP3800 Series Specifications

General IconGeneral
BrandPentair
ModelSPACOMMAND CP3800 Series
CategoryControl Systems
LanguageEnglish

Related product manuals