Pentair SCREENLOGIC INTERFACE User Manual

SCREENLOGIC
®
INTERFACE Wireless Connection Kit Installation Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION GUIDE
SCREENLOGIC
®
INTERFACE
WIRELESS CONNECTION KIT
FOR INTELLITOUCH
®
AND EASYTOUCH
®
CONTROL SYSTEMS

Pentair SCREENLOGIC INTERFACE Specifications

General

Web Interface	Yes
Power Supply	12V DC
Compatibility	Pentair automation systems
Connectivity	Wireless or wired via Ethernet
Mobile App	Yes
Remote Access	Yes
User Interface	Mobile app
Product Type	Pool and spa control interface
Email Alerts	Yes
Functionality	Remote control and monitoring of pool/spa functions
Operating Temperature	32°F to 122°F (0°C to 50°C)

Summary

Overview

ScreenLogic Interface Wireless Connection Kit Contents

Lists the components included in the wireless connection kit.

Summary Installation Steps

ScreenLogic Interface

Overview of the ScreenLogic Interface unit and its connections.

Step 1: Mount the Outdoor Wireless Transceiver and Connect to the IntelliTouch® or EasyTouch® Control System Load Center

Mount the Transceiver Module

Instructions for mounting the outdoor transceiver unit to a surface.

Transceiver Module Wiring

Illustrates the wiring connections for the transceiver module to the COM port.

Connect the Transceiver connection cable to the COM Port on Control System Circuit Board

Guides on connecting the transceiver cable to the load center's circuit board.

Routing and Inserting Transceiver Wires

Details routing the cable and inserting wires into the COM PORT terminals.

Step 2: Connect the ScreenLogic® Interface Indoor Wireless Transceiver to the ScreenLogic Interface Protocol Adapter

Wiring Configuration

Shows the wiring configuration for connecting the indoor transceiver to the protocol adapter.