EasyManua.ls Logo

Pentax G7H+ - Content; Introduction; User Notice; Radio Equipment Notice

Pentax G7H+
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
1. Introduction
1.1. User Notice
This section provides information regarding CE, Warranty and Customer Service with Support. All
specifications are typical and subject to change without prior notice. TI Asahi reserves the right for
improvements and changes to this document, products and services without notice or obligation.
1.1.1. Radio Equipment Notice
The G7H+ is included the radio modules:
- to communicate with Data Collector or Computer.
- to transmit or receive correction data for RTK.
No need to prepare the specific instruction to communicate with your Data Collector or Computer.
It only search the serial number of G7H+ from them and follow the instruction of application or
operating system.
To use for RTK, attach the UHF antenna provided as the standard accessory to G7H+. Please keep
the distance of 60cm from UHF antenna to your body when you use G7H+ as base for RTK.
Radio frequencies and output power:
For communication: 2.400 - 2.480 GHz 8 m Weirp
PMR for RTK 410 - 470 MHz 1W (Base), 0W (Rover)
Cellular for RTK GSM 850 / 900 2W
GSM 1800 / 1900 1W
WCDMA 900/1950 0.25W
LTE 0.2W
1.1.2. CE Mark
The G7H+ carries the CE mark, which indicates compliance with Radio Equipment directive (RED)
of the European Union (EU).
1.1.3. Warranty
The warranty does not cover:
1) Defects due to accidents, abuse, misuse, negligence, abnormal use or any other
non-recommended use.
2) Defects due to environmental conditions that do not conform to G7H+ specifications

Related product manuals