104
Shooting Functions
4
You can choose from the following two autofocus modes. The default
setting is l (Single mode).
Set “AF Mode” in the [A Rec. Mode] menu (p.74).
• When [Sensitivity/No. of Shots] is selected, press the 4 button to display
the currently selected sensitivity in the viewfinder. When [Sensitivity] is set to
[AUTO] in the Fn menu, the automatically selected value is displayed.
•
When [Select AF point] is set to
S
(Select) and [Center of AF Point] is
selected, the AF point can be set to the center by pressing the
4
button.
• Select [Cancel AF]. \ appears in the viewfinder while the 4 button is
pressed. Autofocus does not activate when the shutter release button is
pressed (take your finger off the 4 button to immediately return to AF
mode).
Setting the AF Mode
l
Single mode
When the shutter release button is pressed halfway to
focus on the subject, the focus is locked at that position.
k
Continuous
mode
The subject is kept in focus by continuous adjustment
while the shutter release button is pressed halfway.
Even if the subject is not in focus, the shutter can be
released when the shutter release button is pressed
fully.
MENU
AF.C
AF.S
JPEG
10
Rec. Mode
AF Mode
AE Metering
Select AF point
File Format
JPEG Rec. Pixels
JPEG Quality
Cancel
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
