38
Getting Started
2
2
Insert the batteries according
to the +/– indicators in the
battery chamber.
3
Press down on the batteries
with the battery cover (1) and
slide it as shown in the
illustration (2 ) to close.
You can confirm remaining battery level by checking the { displayed on
the LCD panel.
Be sure to fully close the battery cover. The camera will not turn on if the battery
cover is open.
• Use the AC adapter D-AC76 (optional) when using the camera for a
prolonged period. (p.40)
• Check the battery orientation if the camera does not operate properly after
replacing the batteries.
Battery Level Indicator
{ lit : Battery is full.
¶
} lit : Battery is running low.
¶
? lit : Battery is almost empty.
¶
? blink : The camera turns off after displaying a message.
2
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
