Pentax K200D - Printing Images Using the DPOF Settings; Disconnecting the USB Cable

199
Printing from the Camera
9
1 Use the four-way controller (23) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2 Press the 4 button.
The Print w/DPOF settings screen
appears.
Use the four-way controller (45) to
check the number of copies for each
image, whether the date is imprinted or
not, and total number of copies.
3 Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.197) for details on
how to change the settings.
4 Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the USB cable from the camera and printer when you have
finished printing.
1 Turn off the camera.
2 Disconnect the USB cable from the camera and printer.
Printing Images Using the DPOF Settings
Disconnecting the USB Cable
1
10
10
Print w/DPOF settings
P r in t w / D P O F s e t t i n g s
Print w/DPOF settings
1
10
MENU
OK
100-0046
100 -0 04 6
100-0046
Print
P r in t
Date
D a te
Copies
C o pi e s
Total
To t a l
Print
DateCopies
Total