155
Shooting Settings
6
5
Press the 4 button.
The camera returns to the [White Balance] screen.
6
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
You can set the color space to use. The default setting is [sRGB].
Set [Color Space] in the [A Rec. Mode] menu (p.74).
• If [7. Adjust White Balance] in the [A Custom Setting] menu is set to [Off] after
White Balance is adjusted, the adjusted values become invalid. Set [7. Adjust
White Balance] to [On] again to enable the values used previously.
• White Balance can also be manually measured in the [Adjust White Balance]
screen.
Setting the Color Space
1sRGB
Sets to sRGB color space.
2 AdobeRGB
Sets to AdobeRGB color space.
File names differ depending on the color space setting as shown below.
For sRGB : IMGPxxxx.JPG
For AdobeRGB : _IGPxxxx.JPG
[xxxx] indicates the file number. This is displayed as a four-digit sequential
number. (p.213)
MENU
AdobeRGB
sRGB
PEF
Rec. Mode
Color Space
Input Focal Length
Memory
RAW file format
RAW button
Cancel
OK
OK
To Next Page
Loading...
