Pentax K200D - Page 156

154
Shooting Settings
6
10 Press the 4 button.
The camera is ready to take a picture with the set White Balance.
You can fine tune the White Balance setting.
1 Set [7. Adjust White Balance] in the [A Custom Setting]
menu to [On].
2 Perform desired settings in Steps 1 to 3 of “Setting the
White Balance”.
3 Press the four-way controller (5).
The [Adjust White Balance] screen appears.
4 Use the four-way controller
(2345) to fine tune White
Balance.
Seven levels and 225 patterns are
available on the G-M and B-A axes.
Press the Green button to reset the GM compensation and BA
compensation to [0].
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• [NG] appears when measuring is unsuccessful. Press the 4 button while
displayed to return to the [Adjust White Balance] screen for remeasuring.
• If the picture is extremely overexposed or underexposed, white balance may
not be adjusted. In this case, adjust appropriate exposure and adjust the
white balance.
Fine-Tuning the White Balance
GM compensation
Adjusts the tone of the colors between green
and magenta.
23
BA compensation
Adjusts the tone of the colors between blue
and amber.
45
±0±0
±0±0
G1
G1
G1
MENU
GG
BBA
A
A
MM
OK
O K
OK
OK
Cancel
C a nc e l
Cancel
Shade
S h a d e
Shade