Pentax K200D - Page 155

153
Shooting Settings
6
4 Use the four-way controller (3)
to select K (Manual).
5 Under the light to measure the white balance, fully display
a white sheet of paper in the viewfinder or select a white
area as the subject.
6 Press the shutter release button
fully.
Slide the focus mode lever to \ when
the shutter cannot be released.
The screen to select the measuring range
is displayed.
7 Use the e-dial to select the entire screen or spot area for
the measuring range.
8 When a spot area is selected, use
the four-way controller (2345)
to move the frame to the area you
want to measure.
9 Press the 4 button.
The camera returns to the [White
Balance] screen.
Tune using steps in “Fine-Tuning the
White Balance” if fine-tuning is
necessary. (p.154)
SHUTTER
Adjust
A d ju s t
White Balance
W h i t e B a l a n c e
Manual
M a nu a l
Adjust
White Balance
Manual
Check
C h ec k
Check
OK
O K
OK
OK
OK
O K
OK
OK
OK
O K
OK
OK
SHUTTER
Adjust
A d ju s t
White Balance
W h i t e B a l a n c e
Manual
M a nu a l
Adjust
White Balance
Manual
Check
C h ec k
Check
OK
O K
OK
OK