125
Shooting Functions
4
3
Use the four-way controller (5)
to select l (Auto Bracket).
4
Turn the e-dial to set the EV compensation value.
The following EV compensation values can be set according to the step
interval set in [1. EV Steps] (p.101) in the [A Custom Setting] menu.
5
Press the 4 button.
The camera is ready to take a picture
and ] is displayed on the LCD panel.
6
Press the shutter release button halfway.
The focus indicator ] and EV compensation value appear in the
viewfinder when focused.
7
Press the shutter release button fully.
Three continuous pictures will be taken, the first with no compensation,
the second with negative compensation, and the third with positive
compensation.
Step interval EV compensation value
1/2 EV ±0.5, ±1.0, ±1.5, ±2.0
1/3 EV ±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0
Drive Mode
Auto Bracket
Drive Mode
Auto Bracket
±0.5
EV
±0.5EV
OK
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
