Pentax K200D - Page 147

145
Shooting Settings
6
2 Press the 4 button.
The Custom Image screen appears.
After the power is turned on, the last
image taken is displayed in the
background. Set the main switch to
| to
change the background image to the
Digital Preview image.
3 Use the four-way controller
(45) to choose the Image Tone.
4 Use the four-way controller (23) to choose the item you
want to change ([Saturation], [Hue], [Contrast],
[Sharpness]).
When Image Tone is set to [Monochrome], you can change the settings
for [Filter Effect], [Toning], [Contrast], and [Sharpness].
5 Use the four-way controller (45) to change the setting.
The background image changes according to the setting.
You can visually check the saturation and hue with the radar chart.
For [Sharpness], turn the e-dial to switch between [Fine Sharpness] and
[Sharpness]. The image outlines are even thinner and sharper with [Fine
Sharpness], making it suited for capturing fine subjects such as hair.
Press the Green button to reset the setting.
6 Press the 4 button.
The camera returns to the Capture mode.
• In Picture mode or H (Scene) mode, you can confirm the custom image,
however, the settings cannot be changed.
• When Image Tone is set to [Monochrome], the radar chart is not displayed.
R
Y
G
C
B
M
R
Y
G
C
B
M
Bright
B r ig h t
Bright
Check
C h ec k
Check
OK
O K
OK
OK
BW
R
Y
G
C
B
M
R
Y
G
C
B
M
Check
C h ec k
Check
Portrait
P o r t r a i t
Portrait
OK
O K
OK
OK