Pentax K200D - Page 153

151
Shooting Settings
6
1 Press the { button in Capture
mode.
The Fn menu appears.
2 Press the four-way controller
(4).
The [White Balance] screen appears.
3 Press the four-way controller (23) and set.
Set the main switch to | to display Digital Preview with the set White
Balance.
Fine-tuning White Balance is easier with Digital Preview.
4 Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• White balance cannot be adjusted in Picture mode and H mode (p.79).
• Refer to p.152 for manual adjustment method.
• Preview is Digital Preview, regardless of the [18. Preview Method] setting in
the [A Custom Setting] menu.
• Because the light source changes when the flash discharges, you can set the
white balance for when the flash discharges. Select [Flash] or [Unchanged]
in [17. WB when using flash] in the [A Custom Setting] menu (p.76).
Fn
AUTO
AUTO
AUTO
CUSTOM IMAGE
OK
Exit
E x it
Exit
Fn
White Balance
W h i t e B a l a n c e
Auto
A u to
White Balance
Auto
Check
C h ec k
Check
OK
O K
OK
OK