53
Getting Started
2
7
Press the four-way controller
(5).
The frame moves to the month.
8
Use the four-way controller (23) to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 4, the setting switches between am and pm
depending on the time.
9
Press the 4 button.
The camera is ready to take a picture.
If you set the date and time with the menu operations, the screen will
return to the [R Set-up] menu. Press the 4 button again.
Pressing the 3 button while adjusting the date cancels the settings made
so far and switches the camera to Capture mode. If the power is turned on
without the date and time set, the [Date Adjust] screen is displayed if Initial
Setting has been performed. You can also set the date later by menu
operations. (p.205)
• When you finish the settings and press the 4 button, the camera clock is
reset to 00 seconds. To set the exact time, press the 4 button when the
time signal (on the TV, radio, etc.) reaches 00 seconds.
• You can change the language and date and time settings with the menu
operations. (p.205, p.209)
MENU
24h
00 :
00
OK
OK
mm/dd/yy
2008/0101 /
Date Style
Date Adjust
Date
Time
Cancel
To Next Page
Loading...
Need help?
General
Weight and Dimensions
