Pentax Optio 60 - Page 52

EN-52
This starts printing and displays the message “Printing now” on the monitor
screen.The message will disappear after the printing is finished.
* To cancel printing:
Pressing the
button during print data transfer displays the screen for
selecting whether to [Continue] or [Cancel] printing.
7
 In [Print w/DPOF setting] Mode: This function only lets you print the specified image based on
the previous DPOF settings.
Step Figure
Procedure
Use  or  to select the [Print w/DPOF setting] mode, then press the
button.
1
6
Step Figure Procedure
Use  or  to select [Print], then press the
button to confirm.
Print w/DPOF setting
Select Printing Mode
Select Printing Mode
Print
Print
Select : OK :
Print
Print
Select : OK :
Cancel
Total 2
Cancel :
Print
Continue
Select : OK :
Cancel