EN-17
PREPARING THE CAMERA
Installing the Batteries
You can use 2 AA size batteries (Ni-MH rechargeable or alkaline) to power the camera. Make sure that the
power of the digital camera is off before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery/card cover.
3. Insert the batteries in the correct orientation as shown in the
illustration.
4. Close the battery/card cover.
To remove the batteries, turn the camera off before removing
batteries and hold the camera with the battery/card cover
facing upward, then open the battery/card cover.
Be careful not to drop the batteries when opening or closing the battery/card cover.
Due to the characteristics of AA alkaline batteries, camera performance may deteriorate. AA alkaline batteries are not
recommended except in emergencies and checking the camera's functionality.
To Next Page
Loading...
Need help?
General
