Pentax Optio E20 - Setting the DPOF

EN-53
Setting the DPOF
DPOF (Digital Print Order Format) allows you to embed printing information on your SD Memory Card. By
using DPOF, you can select an image to be printed and then specify the number of prints and whether or not
to imprint the data when the image was taken. Take your SD Memory Card to a DPOF enabled printer that
accepts SD Memory Cards. The DPOF/card-compatible printer will read the embedded information on the SD
Memory Card and print your images as specified.
To configure print settings for a single image / all images.
1. Press the button, then use the four-way controller (WX) to select
the desired image you want to print.
2. Press the MENU button. Use the four-way controller (ST) to select
[DPOF], then press the button.
3. Use the four-way controller (ST) to select as your preference, then
press the button.
[This Image]: To configure print settings for a single image.
[All Images]: To configure print settings for all images.
[Reset All]: Resets all DPOF settings.
Slideshow
Slideshow
Protect
Protect
DPOF
DPOF
Slideshow
Protect
DPOF
Playback1
Playback1
Playback2
Playback2
Playback1 Playback2
Select :
Select :
Exit :
Exit :
Select :Exit :
DPOF
DPOF
This Image
This Image
All Images
All Images
Reset All
Reset All
DPOF
This Image
All Images
Reset All
Select :
Select :
Cancel :
Cancel :
Select :Cancel :