EN-59
TRANSFERRING FILES FROM YOUR DIGITAL
CAMERA TO COMPUTER
For transferring files to PC, you can use either the provided USB cable or a card reader. When using the USB
cable, installing the supplied USB driver is necessary for Windows 98/98SE users.
Step 1: Install the USB driver
Installation on Windows 98 & 98SE
The USB driver on the supplied CD-ROM (S-SW60) is exclusively for Windows 98 and 98SE. Windows 2000/
ME/XP users don't need to install the USB driver.
1. Insert the enclosed CD-ROM (S-SW60) into your CD-ROM drive.
2. With your camera turned off, connect it to your PC with the USB
cable and then turn it on.
3. The "Add New Hardware Wizard" will appear on screen as
shown on the right. Click on "Next".
4. Select "Search for the best driver for your device". Click on "Next".
To Next Page
Loading...
