EN-34
Setting Focus Mode
Images can be captured with the focus determined automatically using auto focus. You may over-ride the
auto focus and specify [ ] macro or [ ] infinity.
1. Rotate the mode dial to , , , , or .
2. Press the power switch to turn on the power.
3. Press the four-way controller (X/ ). The focus mode changes
each time the button is pressed. You can also change the setting
using four-way controller (ST).
4. Press the button to confirm the setting.
5. Compose your scene and press the shutter release button.
The camera has three focus modes as below.
Focus mode Description
Standard Select Standard-focus setting for most occasions when you want the camera to
automatically determine the focus setting. When using Standard-focus setting,
any object at a distance of 40 cm or greater can be focused.
Macro Select Macro-focus setting to capture close-up images. When the lens is zoomed
to its widest position you may focus on objects as close as 6 cm. When the lens
is zoomed to its telephoto position (3x zoom) you may focus on objects as close
as 35 cm.
Infinity Select Infinity-focus setting when you want to capture images of subjects at a
distance of infinity.
OK :
OK :
Focus Mode
Standard
Focus Mode
Standard
To Next Page
Loading...
Need help?
General
