EN-26
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to and turn your camera on by pressing
the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller (T) to select [Date Adjust], then press
the button.
[Date Adjust] is displayed.
4. Press the four-way controller (WX) to select Date Style, Day,
Month, Year and Time fields.
To increase a value, press the four-way controller (S).
To decrease a value, press the four-way controller (T).
To select the time display in 12-hours or 24-hours format, press
the four-way controller (ST).
5. Press the button after all fields are set.
The date illustration shown is for the purpose of explanation and may differ from the actual setting of your camera.
Set-up1
Set-up2
Set-up3
Format
Sound
Date Adjust
Language
Select :
Set-up1 Set-up2 Set-up3
Format
Sound
Date Adjust
Language
Select :
Off
d/m/y
English
Off
d/m/y
English
d/m/y
d/m/y 12h
AM
AM
01 / 09 / 2006
01 / 09 / 2006
00 : 00
12h
00 : 00
Date Adjust
Select :
Date Adjust
Select :
OK :
OK :
Date Style
Date Style
To Next Page
Loading...
Need help?
General
